Volvo Bluff-Body Experimental Data:

Experimental data from the non-reacting and reacting bluff-body experiments conducted by Volvo [1-3] can be downloaded from the links listed below.  The data have been extracted from the figures in the publicly available papers [1-5] describing the experiments.  Please note that the figure quality limited the precision of the extracted data.  Formatting details can be found in the header of each file.

Volvo - 288K Inlet:

• Volvo_Exp_Data_Non-Reacting_20160922.zip
• Volvo_Exp_Data_Reacting_20160922.zip
  
• Volvo_Exp_Data_Reacting_CARS_20171116.zip

Volvo - 600K Inlet:

• Volvo_Exp_Data_Reacting_600Kinlet_20171208.zip

 Volvo Bluff-Body References:

1. Sjunnesson, A., Olovsson, S., Sjoblom, B., “Validation Rig – A Tool for Flame Studies,” International Society for Air-breathing Engines Conference, ISABE-91-7038, Nottingham, United Kingdom, 1991.
2. Sjunnesson, A., Nelsson, C., Max, E., “LDA Measurements of Velocities and Turbulence in a Bluff Body Stabilized Flame,” Fourth International Conference on Laser Anemometry – Advances and Application, ASME, Cleveland, OH, 1991.
3. Sjunnesson, A., Henrikson, P., Lofstrom, C., “CARS Measurements and visualization of reacting flows in a bluff body stabilized flame,” 28th Joint Propulsion Conference and Exhibit, AIAA 92-3650, Nashville, TN, 1992.
4. Fureby, C., Moller, S.I., "Large-Eddy Simulation of Reacting Flows Applied to Bluff-Body Stabilized Flames," AIAA Journal, Vol. 33, 1995, pp. 2339-47.
5. Zettervall, N., Nordin-Bates, K., Nilsson, E.J.K., Fureby, C., "Large Eddy Simulation of a premixed bluff body stabilized flame using global and skeletal reaction mechanisms," Combustion and Flame, Vol. 179, 2017, pp. 1-22.